Safety Check
22
8.Frame, Fork, and
Seat
9.Motor Drive
Assembly and
Thro�le
10.Ba�ery
11.Electrical Cables
12.Accessories
Your cables, spokes, and chain will stretch a�er an ini�al break-in period of 50-100 mi (80-160 km),
and bolted connec�ons can loosen. Always have a cer�fied, reputable bike mechanic perform a
tune-up on your bike a�er your ini�al break-in period of 50-100 mi (80-160 km) (depending on
riding condi�ons such as total weight, riding characteris�cs, and terrain). Regular inspec�ons and
tune-ups are par�cularly important for ensuring that your bike remains safe and fun to ride.
Check that the frame and fork are not bent or broken.
If either frame or fork are bent or broken, they should be replaced.
Check that the seat is adjusted properly, and seatpost quick release lever is securely �ghtened.
Ensure hub motor is spinning smoothly and motor bearings are in good working order.
Ensure all power cables running to hub motor are secured and undamaged.
Make sure the hub motor axle bolts are secured and the torque arm, torque arm bolt,
and torque washers are in place.
Ensure ba�ery is charged before use.
Ensure there is no damage to ba�ery.
Lock ba�ery to frame and ensure that it is secured.
Charge and store bike and ba�ery in a dry loca�on, between 50 °F – 77 °F (10 °C – 25 °C).
Let bike dry completely before using again.
Look over connectors to make sure they are fully seated and free from debris or moisture.
Check cables and cable housing for obvious signs of damage.
Ensure front light is func�oning, adjusted properly, and unobstructed.
Ensure all reflectors are properly fi�ed and not obscured.
Ensure all other fi�ngs on bike are properly secured and func�oning.
Inspect helmet and other safety gear for signs of damage.
Ensure rider is wearing a helmet and other required riding safety gear.
Ensure moun�ng hardware is properly secured if fi�ed with a front rack, rear rack, basket, etc.
Ensure the taillight and taillight power wire are properly secured if fi�ed with rear rack.
Ensure the fender moun�ng hardware is properly secured if fi�ed with fenders.
Ensure there are no cracks or holes in fenders.
If installed, ensure the op�onal rear wheel lock is secured in the unlocked posi�on and the
key is removed before every ride.