Freescale Semiconductor P&E Tracelink, User Manual, Page: 8 / 39

Tracelink User Manual 5
3.3 USB Connector
The Tracelink provides a USB connector for Universal Serial Bus communications
with the host PC. The Tracelink is a USB 1.1 compliant device.
Figure 3-3: USB Connector
3.4 Target Debug Connectors
The different families of Freescale microcontrollers are supported via the multiple
debug headers located on the Tracelink. These headers are accessed by flipping
open the plastic case. Pin 1 of each header is marked with the number “1” and also
has a rounded corner.
Note: To avoid improper connections, the red stripe of the ribbon cable should always be
oriented towards Pin 1.
Warning: Do not attempt to use multiple ports at once, as this may damage both the target
processors and the Tracelink.