Freescale Semiconductor P&E Tracelink, User Manual, Page: 32 / 39

Tracelink User Manual 29
Select the “P&E TraceLink USB” and/or “P&E TraceLink Ethernet” option. Continue
with the remaining steps in the wizard to finalize the project.
Step 2. Add Initialization Code
If necessary, add any device specific initialization code to configure the
microprocessor for trace generation. For example, the trace pins may be configured
as general purpose input/output by default and you may need to add a few lines of
code to initialize them for trace output. Once the changes are made, make sure to
compile/build the project.
Step 3. Configure Trace Settings
Click on Run -> Debug Configurations. Select the appropriate configuration (Flash,
RAM, etc.) from the left panel. Within the “Main” tab, click on the “Edit” button inside
the “Connection” groupbox.
Figure 7-2: CodeWarrior: Select Configuration (Edit Button Highlighted)
Inside the P&E connection dialog that appears, look for the “Trace Max Buffer Size”