Freescale Semiconductor
Hardware Getting Started Guide
© 2010 Freescale Semiconductor, Inc.
This document describes the MSC8156EVM and its related
hardware kit. The MSC8156EVM getting started procedure
explains and verifies the board’s basic operation in a
step-by-step format. Settings for switches, jumpers, LEDs,
and push buttons are shown. There are also instructions for
connecting the EVM to your development/debug platform
with CodeWarrior IDE installed.
The MSC8156EVM functions with an integrated
development environment (IDE), such as Freescale
CodeWarrior IDE. Instructions for working with the IDE are
beyond the scope of this document.
Contents
1.Definitions, Acronyms, and Abbreviations . . . . . . . . . . . . 2
2.Bit and Byte Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.Related Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4.Hardware Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.DIP Switch Location Default Settings . . . . . . . . . . . . . . . . 5
6.Power Switch and Push Buttons . . . . . . . . . . . . . . . . . . . . 6
7.Jumper Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
8.Connector Default Settings . . . . . . . . . . . . . . . . . . . . . . . . 8
9.LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10.Getting Started Procedure . . . . . . . . . . . . . . . . . . . . . . . 10
11.Next Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MSC8156EVM
Document Number: MSC8156EVMHGSG
Rev. 0 10/2010
