Freescale Semiconductor MPC5748G EVB, User Manual

Page: 3 / 88

MPC5748G EVB User Guide, User Guide, Rev. 0, 08/2015
3 Freescale Semiconductor, Inc.
1. Introduction
This user guide details the setup and configuration of the Freescale MPC5748G customer Evaluation
Board (hereafter referred to as the EVB). The EVB is intended to provide a mechanism for easy
evaluation of the MPC5748G family of microcontrollers, and to facilitate hardware and software
development. Various daughtercards are available which connect to the EVB via two high density
connectors. Please consult your Freescale representative for more details on daughtercard pricing and
availability.
The EVB is intended for bench / laboratory use and has been designed using normal temperature
specified components (+70°C).
This product contains components that may be damaged by electrostatic discharge. Observe precautions
for handling electrostatic sensitive devices when using this EVB and associated microcontroller.
The user manual is intended to be read alongside the respective MCU documentation available at
www.freescale.com and includes:

Reference Manuals

Product Data Sheets

Application notes

Chip Errata
1.1. Peripheral Daughtercards
The EVB has connectors for various peripheral daughtercards (for example MLB) that provide
additional peripheral functionality. These are not supplied with the EVB and must be sourced separately.
Please contact your Freescale representative for pricing and availability.
2. EVB Features
The EVB provides the following key features:

Single 10-14 V DC external power supply input with on-board regulators to provide all of the
necessary EVB and MCU voltages. Power may be supplied to the EVB via a 2.1 mm barrel style
power jack or a 2-way screw type connector. 12 V operation allows in-car use if desired.

Master power switch and regulator status LED’s.

USB Serial interface

2 x High Speed CAN transceiver routed to 3-way headers

2 x LIN interfaces routed to standard Molex headers

Main clock supplied from on board crystal or SMA connector

User reset switch with reset status LED’s

Ethernet PHY and RJ45 socket configurable as RMII or MII

USB Type A Host interface

USB Type AB (micro USB) OTG interface