Freescale Semiconductor KIT33912EVME, Setup Instructions

Page: 22 / 50

LIN Master Control Page
KIT33912EVME System Basis Chip with LIN Tranceiver Setup Instructions, Rev. 2.0
14 Freescale Semiconductor
Chapter 4 LIN Master Control Page
4.1 Overview
This section shows control of the KIT33912EVME board from the control page through LIN communication protocol.
• 4.2, Setup Instruction
• 4.3, Description of the Control GUI
• 4.4, LIN Port Control
4.2 Setup Instruction
Before switching the power on, place the supply jumpers JP7 (VDD), JP8 (VS2) and JP9 (VS1), then place the control jumpers
JP10 - JP16, JP19 and JP20 in position 1-2. For LIN communication, place jumpers JP202 (TxD), JP203 (RxD) in position 2-3.
Route the LIN signal to the MC33912 device by placing jumper JP205 and connect the MC33912 to the MCU through the SCI
jumpers JP17, JP18 in position 1-2. To enable the LIN physical interface MCZ33661EF device, move jumper JP204.
4.3 Description of the Control GUI
The LIN control page has the same functions and controls as the FreeMASTER control page (see 3, FreeMASTER Control
Page ), except for the LIN port control section; see Figure 4-1 .
Figure 4-1. Description of Graphical User Interface - LIN Control