Preface
KIT33912EVME System Basis Chip with LIN Tranceiver Setup Instructions, Rev. 2.0
Freescale Semiconductor
1
Preface
This User’s Guide provides the installation steps for the KIT33912EVME System Basis Chip with LIN Transceiver (SBCLIN)
Audience
This document is intended for application developers who are setting up Freescale’s KIT33912EVME System Basis Chip with
LIN Transceiver.
Suggested Reading
Additional documentation on the FreeMASTER software may be found at
Conventions
This document may use the following conventions:
:
Term or Value
Definition
Examples
Terminal Names
Terminal names are the physical connections
and are shown in text as all upper case
characters.
... the external supply voltage VBAT.
Terminal Values
Terminal values are the currents to/from a
terminal and are shown as upper and
subscripted text.
In Stop Mode the voltage regulator still supplies
the MCU with V
DD.
Active High Signals
(Logic One)
No special symbol attached to the signal name.
A0
SCLK
Active Low Signals
(Logic Zero)
Noted with an overbar in text and in most
figures.
RST
CS
Decimal Values
No special symbol attached to the number
1.0
34
Numbers
Considered positive unless specifically noted as
a negative value
5.0
-10
Blue Text
Linkable on-line
...refer to
Bold
Reference sources, paths, emphasis
References
The following sources were referenced to produce this manual:
[1] MC33912 Data Sheet,
Freescale Semiconductor, Inc.
[2] MC9S08DZ60 Data Sheet,
Freescale Semiconductor, Inc.
