Freescale Semiconductor KIT33912EVME, Setup Instructions

Page: 18 / 50

FreeMASTER Control Page
KIT33912EVME System Basis Chip with LIN Tranceiver Setup Instructions, Rev. 2.0
10 Freescale Semiconductor
Chapter 3 FreeMASTER Control Page
3.1 Overview
The section describes basic guide to controlling the KIT33912EVME board by the FreeMASTER control page.
• 3.2, Setup Instruction
• 3.3, Description of the Control GUI
• 3.4, SPI Registers Control/Status Array
• 3.5, Pulse Width Modulation
• 3.6, Watchdog Service
• 3.7, Wake-up Sources
3.2 Setup Instruction
Before switching the power on, place the communication jumpers JP202 (TxD), JP203 (RxD) in position 1-2, short the supply
jumpers JP7 (VDD), JP8 (VS2) and JP9 (VS1), and than place the control jumpers JP10 - JP16, JP19 and JP20 in position 1-2.
To disable the LIN physical interface MCZ33661EF device, place jumper JP204.
3.3 Description of the Control GUI
The following paragraphs describe the indicators and the controls, on the GUI.
• An indicator is a graphical element displaying information (e.g., the status bit VMS ).
• A control is a graphical element which displays information and allows altering the state of the element (e.g., the
SLEEP button).
Figure 3-1. Description of Graphical User Interface - FreeMASTER Control
1
2
4
5
6
9
7
8
3
10