KTFRDM17C724UG, Rev. 1.0
4
Freescale Semiconductor, Inc.
Getting Started
2
Getting Started
2.1 Kit Contents/Packing List
The FRDM-17C724-EVB contents include:
•
Assembled and tested evaluation board/module in an anti-static bag
•
Quick Start Guide, Analog Tools
•
Warranty card
2.2 Jump Start
Freescale’s analog product development boards help to easily evaluate Freescale products. These tools support analog mixed signal and
power solutions including monolithic ICs using proven high-volume SMARTMOS mixed signal technology, and system-in-package devices
utilizing power, SMARTMOS and MCU dies. Freescale products enable longer battery life, smaller form factor, component count reduction,
ease of design, lower system cost and improved performance in powering state of the art systems.
•
Go to
www.freescale.com/analogtools
•
Locate your kit
•
Review your Tool Summary Page
•
Look for
•
Download documents, software, and other information
Once the files are downloaded, review the user guide JumpStart. The user guide includes setup instructions, BOM and schematics. Jump
start bundles are available on each tool summary page with the most relevant and current information. The information includes everything
needed for design.
2.3 Required Equipment and Software
To use this kit, you need:
•
DC Power supply (2.7 V to 5.5 V, 0.1 A to 0.4 A, depending on stepper motor requirements)
•
USB A to mini-B cable
•
Oscilloscope (preferably 4-channel) with current probe(s)
•
Digital multimeter
•
FRDM-KL25Z Freedom Development Platform
•
Typical loads (stepper motor, brushed DC motors, or power resistors)
•
3/16" blade screwdriver
•
One 12-pin (PPTC062LFBN-RC), two 16-pin (PPTC082LFBN-RC), and one 20-pin (PPTC102LFBN-RC) female
connector, by Sullins Connector Solutions, or equivalent soldered to FRDM-KL25Z
2.4 System Requirements
The kit requires the following:
•
USB-enabled PC with Windows
®
XP or higher
