KTFRDM17C724UG, Rev. 1.0
Freescale Semiconductor
11
Installing the Software and Setting up the Hardware
5
Installing the Software and Setting up the Hardware
5.1 Installing the Motor Control Graphical User Interface (GUI) on your
Computer
The latest version of the Motor Control GUI is designed to run on any Windows 8, Windows 7, Vista, or XP-based operating system. To
install the software, go to
www.freescale.com/analogtools
and select your kit. Click on that link to open the corresponding Tool Summary
Page. Look for "Jump Start Your Design". Download to your computer desktop the Motor Control GUI software.
Run the install program from the desktop. The Installation Wizard will guide you through the rest of the process.
To use the Motor Control GUI, go to the Windows Start menu, then Programs, then Motor Control GUI, and click on the Freescale icon.
The Motor Control Graphic User Interface (GUI) will appear. The GUI is shown in
Figure 3
. The hex address numbers at the top are loaded
with the vendor ID for Freescale (0x15A2), and the part ID (0x138). The left side panel displays these numbers only if the PC is
communicating with the FRDM-KL25Z via the USB interface.
Figure 3. Motor Control GUI
