UPGRADE INSTRUCTIONS
UPGRADE INSTRUCTIONS
MOTOROLA
DSPD56362EVM Upgrade Manual
1-3
1.3.1
DSP Replacement
To upgrade the DSP:
1. Use a Philips-head screwdriver to remove the 4 screws on the DSP socket U1.
2. Remove the socket top.
3. Remove the generic DSP using a chip suction device and replace it with the DSP included in
the upgrade kit. Verify that the DSP is placed in the socket securely and that the pins make
contact with the socket. Refer to Figure 1-1 for the correct orientation of the DSP.
Caution: To avoid damaging the DSP, use an anti-static wrist band when handling this
device. Using a device other than a chip suction device to lift the DSP may damage the
fine-pitched pins.
4. Replace the socket top and screw the top down.
1.3.2
68HC11 Replacement
To upgrade the 68HC11:
1. Remove the 68HC11 microcontroller from the socket U7 using a PLCC chip extractor device.
2. Replace the component with the 68HC11 included in the upgrade kit. Refer to Figure 1-1 for
the correct orientation of the 68HC11.
1.3.3
EPROM Replacement
To upgrade the EPROM:
1. Remove the EPROM from the socket U6 using a PLCC chip extractor device.
2. Replace the component with the EPROM included in the upgrade kit. Refer to Figure 1-1 for
the correct orientation of the EPROM.
1.3.4
Jumper Settings
Figure 1-2 shows how to modify the jumper settings:
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
.
..
