Command-Line Version
56800E Flash Programmer User Guide, Rev. 0
Freescale Semiconductor
7
2.1.1.9
–LPT<X>
By default, the 56800E Flash Programmer uses the current configured device on the CCS server. How-
ever, the default can be overridden by the –USB or –LPTX switches. The LPT switch will configures the
CCS server for the
Parallel Command Converter
. Additionally, this change will be permanent to CCS,
and may need to be changed before other applications use the CCS server. When connecting to a remote
CCS server using the –remote switch, the remote server will be configured to use this LPT port.
Example:
fflash flash.cfg my_appl.S .LPT1
2.1.1.10 –p<PORT>
Legacy Support
This option is used to specify which LPT port to use when connecting to a
Parallel Command Converter
.
When this option is specified, along with the –remote option, it connects to the specified LPT port on that
remote device. Because this command is deprecated, it only supports the addresses listed in
Table 2-1.
No
other address will be supported. The option –LPTX should be used in place of this deprecated option.
Example:
fflash flash.cfg my_appl.s –p0x378