GUI Version
56800E Flash Programmer User Guide, Rev. 0
Freescale Semiconductor
17
Figure 2-8 Memory Viewer
The memory viewer only allows 0x1000 words at a time to be viewed. This view restriction is due to
memory limitations on the Host PC. The address currently being viewed can be changed by typing a new
address in the address field, and then pressing the ENTER key. The type of memory being viewed,
P
Memory
or
X Memory
, is selected here as well.
2.2.3.1
Swapping the ASCII View
In certain circumstances, such as viewing strings embedded on the device, it is desirable to be able to swap
the ASCII view. Typically, the ASCII view matches the hexadecimal view byte-for-byte. When the Swap
ASCII View is enabled the ASCII display is swapped for each word.
2.2.3.2
Saving a Range of Memory
Selecting the
Save Range
button in the Memory Viewer dialog will cause a dialog similar to the one
illustrated in
Figure 2-9.
Here, the range and type of memory to be stored in the specified output file is
selected. The output file is a
S–Record
file. Unlike the
View Memory
dialog, the
Save Memory Range
dialog is not limited to storing 0x1000 words. Rather, any length of words can be stored to a S–Record file.
