56800E Flash Programmer User Guide, Rev. 0
14
Freescale Semiconductor
Figure 2-3 Progress Dialog for Programming the FLASH
This dialog box shows the current programming process of the 56800E Flash Programmer operation being
performed. The
Details
button reveals more information about the current operation being performed and
the operations already performed, illustrated in
Figure 2-4.
The Programming dialog box also provides a
Save to Log
button. The
Save to Log
button allows the selection of a log file to save the contents revealed
by the
Details
button.
Figure 2-4 Progress Dialog for Programming FLASH with Details Revealed
2.2.1.1
Erasure Mode Option
There are three selections for the Erasure mode option found in
Figure 2-2
:
1. all—
When Erasure mode is set to
all
, the entire DSC is erased regardless how much data is
programmed through the S-Record.
2. unit—
When the Erasure mode is set to
unit
, a unit is erased if, and only if, a word is written to it.
3.
page—
When the Erasure mode is set to
page,
a page is erased if, and only if, a word is written to
it.
This option is identical to the erase=X option in the command line version.
