manualshive.com logo in svg

Freemotion R5.7, User Manual, Page: 5 / 24

Share
Download
Freemotion R5.7 User Manual Download Page 5

5

M8 x 19mm Button

Screw (77)–4

M8 x 16mm Button

Screw (54)–6

M8 Split

Washer (55)–14

M4 x 16mm

Round Head

Screw (80)–6

M6 Washer

(75)–7

M10 x 63mm Bolt Set (62)–1

M8 x 50mm Button

Screw (52)–4

M6 x 38mm Button

Screw (67)–3

M6 x 42mm Button

Screw (81)–4

M4 x 12mm

Screw (42)–1

M6 x 30mm Button

Screw (37)–4

1. Orient the Left Front Stabilizer (15) with the Wheel

(17) positioned as shown. Attach the Left Front
Stabilizer to the left side of the Frame (1) with three
M8 x 16mm Button Screws (54) and three M8 Split
Washers (55). 

Attach the Right Front Stabilizer (not shown) to
the right side of the Frame (1) in the same way.

15

54

1

1

55

55

54

17

ASSEMBLY

Assembly requires two persons.

Place all parts of the exercise cycle in a cleared area and remove the pack-

ing materials. Do not dispose of the packing materials until assembly is completed. 

In addition to the included

tools, assembly requires your own Phillips screwdriver                    and adjustable wrench                   . 

As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. 
The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end
of this manual. The number following the parentheses is the quantity used in assembly. 

Note: Some small

parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been pre-
assembled.

Summary of Contents for R5.7

























Reviews:

No comments