29
HOW TO USE THE SOUND SYSTEM
To listen to music and the console audio on your per-
sonal headphones or ear buds, plug the audio wire on
your headphones into the audio jack in the center of
the lower section of the console. Note: This audio jack
is for audio output only.
This incline trainer has been designed specifically to
work with iPod
®
and has been certified by the devel-
oper to meet Apple performance standards.
To play music or audio books through the console’s
sound system, you must connect your iPod to the
console through the cable extending from the lower
section of the console. The console will charge your
iPod while you use it. Make sure that the iPod is fully
plugged in.
Next, press the play button on your iPod. Adjust the
volume by pressing the Vol increase and decrease but-
tons on the console.
Plug an MP3 player, smartphone, or other USB device
into the USB port on the front of the console to charge
your device. The USB port can also be used for firm-
ware updates (see page 27).
HOW TO CHANGE THE AUDIO INPUT
To select a different audio source, touch the music
notes icon at the bottom of the screen. Then, choose
an audio source from the list.
1. Wall of TV’s.
Select this audio source to listen to the audio
output from a remote TV. Note: The incline trainer
must be connected to the TV (see HOW TO USE
THE ENTERTAINMENT MODE on page 26).
2. Personal TV.
Select this audio source to listen to the audio from
the console’s 17" Digital TV. Note: The console
must have a 17" Digital TV for this option to
function.
3. iPod.
Select this audio source to listen to your iPod (see
HOW TO USE THE SOUND SYSTEM at the left).
4. FM Radio.
The console has a built-in FM radio. Select this
audio source to use the FM radio tuner.
HOW TO USE THE INTERNET BROWSER
Note: To use the browser, you must have access to a
wireless network including an 802.11b/n router with
SSID broadcast enabled (hidden networks are not
supported).
To open the browser, touch the globe button near the
lower left corner of the screen. Then, select a website.
To return to the previous web page, touch the Browser
Back button. To exit the browser, touch the Return
button.
To use the keyboard, see HOW TO USE THE TOUCH
SCREEN on page 18.
To enter a different web address in the URL bar, first
slide your finger down the screen to view the URL bar,
if necessary. Then, touch the URL bar, use the key-
board to enter the address, and touch the Go button.
Note: While you are using the browser, the speed,
incline, fan, and volume buttons will still function, but
the workout buttons will not function.
Note: If you have questions after following these
instructions, go to www.iFit.com/support for
assistance.
