8
4. Partially tighten two 1/2" x 4 1/2" Bolts (96) with two 1/2"
Star Washers (124) through the top of the bracket near
the right Upright (93) and into the Base Frame (56);
do
not tighten the Bolts yet. Be careful not to pinch any
wires.
Repeat this step on the left side of the treadmill.
Then, tighten the 1/2" x 4 1/2" Bolts (96) and the 1/2" x
2 1/2" Bolts (95) on both sides.
95
93
56
96
124
4
3
3. Partially tighten two 1/2" x 2 1/2" Bolts (95) through the
bracket near the right Upright (93) and into the Base
Frame (56);
do not tighten the Bolts yet. Be careful
not to pinch any wires.
Repeat this step on the left side of the treadmill.
93
56
95
2
2. Locate the 80" Wire Harness (118) and 72" Wire
Harness (119) in the Upright (93) access hole.
Connect the 80" Wire Harness (118) and 72" Wire
Harness (119) at the front of the Uprights (93).
See the
inset drawing. The connectors should slide together
easily and snap into place.
If they do not, turn one
connector and try again.
IF YOU DO NOT CONNECT
THE CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Attach the Access Plate (130) to the Uprights (93) with
two #8 x 1/2" Machine Screws (129).
130
118
119
129
93
118
119
