6
2. Attach the Rear Stabilizer (7) to the Frame (1)
with two M10 x 50mm Button Patch Bolts (73),
four M10 Washers (67), and two M10 Locknuts
(74).
2
73
67
74
1
7
67
3
3. Orient the Handlebar (3) as shown.
Loosen the Post Knob (32) on the front of the
Frame (1) and pull it outward. Then, insert the
Handlebar (3) into the Frame.
Move the Handlebar (3) upward or downward to
the desired position, release the Post Knob (32)
into an adjustment hole in the Handlebar, and
then tighten the Post Knob. Make sure that the
Post Knob is firmly engaged in an adjustment
hole.
32
3
Holes
1
44
15
14
4. Identify the Right Pedal (15), which is marked
with an “R.”
Using an adjustable wrench, firmly tighten the
Right Pedal (15) clockwise into the Right Crank
Arm (14).
Tighten the Left Pedal (not shown) counter-
clockwise into the Left Crank Arm (not shown).
