8
4. Orient the Accessory Tray (18) as shown. Press
the Accessory Tray into the Shield Cap (5).
4
5
18
5.
Identify the Right Handrail (69).
While another person holds the Right Handrail
(69) near the Upright (26), connect the right
Pulse Wire (78) to the right Sensor Wire (79).
Insert the excess wire into the Right Handrail
(69). Then, slide the Right Handrail onto the
Upright (26).
Tip: Avoid pinching the wires.
Attach the Right
Handrail (69) with a 3/8" x 3/4" Screw (123) and
an M10 Split Washer (127).
Do not tighten the
Screw yet.
Repeat this step for the Left Handrail (70).
5
69
127
123
79
26
70
78
30
Avoid pinching
the wires
