20
This section explains how to adjust the strength equipment. Make sure all that parts are properly tightened each
time the strength equipment is used. Replace any worn parts immediately.
ADJUSTMENT
ADJUSTING THE RESISTANCE
To change the amount of resistance, insert the
weight pin into the desired weight.
Make sure that
the weight pin is fully inserted.
To add 5 lbs. (2.25 kg) of resistance, pull the indi-
cated knob and lower the drop-down weight onto
the weight stack.
When you are not using the drop-down weight,
slide it upward and engage the knob into the latch
bracket.
Move the drop-down weight upward and
downward slightly to make sure that the knob is
engaged in the latch bracket.
Knob
Weight
Pin
ADJUSTING THE PIVOT ARM AND THE
PIVOT LEG
To change the position of the pivot arm, first hold it
with one hand while pulling the adjustment knob out
of the cam bracket. Move the pivot arm to the
desired position, and reengage the adjustment knob
into the cam bracket.
To change the position of the pivot leg, first hold it
with one hand while pulling the adjustment knob out
of the pivot leg bracket. Move the pivot leg to the
desired position, and reengage the adjustment knob
into the pivot leg bracket.
WARNING:
Always make sure
that the adjustment knobs are fully engaged
into the brackets.
Pivot
Leg
Knob
Pivot Leg
Bracket
Pivot Arm
Cam Bracket
Knob
Latch Bracket
Drop-down Weight
