HOW TO MOVE AND LEVEL THE ELLIPTICAL
TRAINER
Make sure that the power cord is unplugged.
(Note: If a CATV cable is connected to the elliptical
trainer, it may be necessary to disconnect the cable
if the elliptical trainer will be moved far.) Next, see
the left inset drawing and locate the two leveling feet
under the rear of the frame. Turn the leveling feet so
that they are not touching the floor.
Due to the size and weight of the elliptical trainer,
moving it requires two persons.
Have two persons
lift the indicated end of the elliptical trainer until the
elliptical trainer will roll on the front wheels. Carefully
move the elliptical trainer to the desired location and
then lower it back to the level position.
CAUTION:
To decrease the risk of injury, bend your legs
and keep your back straight. Make sure to use
your legs rather than your back to lift the ellipti-
cal trainer. Do not attempt to move the elliptical
trainer over an uneven surface.
Next, turn the two leveling feet under the rear of the
frame until they are just touching the floor. If the ellip-
tical trainer rocks slightly during use, turn the leveling
feet under the front of the frame (see the right inset
drawing) until the rocking motion is eliminated.
HOW TO CONNECT THE POWER CORD
If the elliptical trainer has a Basic console, it can be used with or
without a power cord. To purchase a power cord, see HOW TO
CONTACT CUSTOMER CARE on page 2 of this manual. If the el-
liptical trainer has a Workout TV console, a power cord must be
used for the TV to be operated. A power cord is included with the
Workout TV console.
To use a power cord, first plug one end of the power cord into the
jack on the front of the elliptical trainer. Plug the other end of the
power cord into an appropriate outlet that is properly installed in ac-
cordance with all local codes and ordinances.
H
OW TO
S
ET
U
P THE
E
LLIPTICAL
T
RAINER
Lift
Here
Wheels
Power
Cord
Jack
7
Leveling
Feet
Summary of Contents for Elliptical trainer
Page 2: ......
