Freemotion Elliptical trainer, User Manual

Page: 7 / 34

5
Assembly requires two persons. Set the elliptical trainer in a cleared area and remove all packing materials. Do
not dispose of the packing materials until assembly is completed. Assembly can be completed using the in-
cluded hex keys.
H
OW
T
O
A
SSEMBLE
T
HE
E
LLIPTICAL
T
RAINER
1. Lift the left Handlebar Arm (17) to the position
shown. Attach the left Handlebar Arm to the Left
Handlebar (19) with two 3/8" x 5/8" Shoulder
Screws (55).
Attach the right Handlebar Arm (not shown) to the
Right Handlebar (20) in the same way.
2. Have another person hold the Upright (2) in the po-
sition shown. Connect the Lower Power Wire (96)
to the Upper Power Wire (97). Connect the Lower
CATV Cable (102) to the Upper CATV Cable (101).
Connect the Lower Battery Wire (77) to the Upper
Battery Wire (78). Connect the Lower Controller
Wire (80) to the Upper Controller Wire (79).
Attach the Upright (2) to the Frame (1) with four
3/8" x 1 1/4" Button Head Screws (48) and four 3/8"
Star Washers (85).
Make sure that no wires are
pinched between the Upright and the Frame.
17
1
2
48
48
85
97
96
77
79
80
102
2
1
55
19
20
101
78
85
48
85