14
HOW TO USE THE RIDE MODE
1. Select the INTERVAL mode.
See steps 1 to 4 on page 13 and select the
INTERVAL mode.
2. Select the RIDE mode.
To view the RIDE mode at any time during any
interval, press the STOP/Results button. The word
RIDE will appear in the message banner.
3. View data for the entire ride.
When the RIDE
mode is selected,
the console will
show data for the
entire ride so far.
See the DISPLAY
DIAGRAM on
page 7.
The time and dis-
tance displays will
show the elapsed
time for the entire
ride and the dis-
tance for the entire
ride. The displays
will show the
maximum values
achieved for the
ride and the aver-
age values for the ride.
Note: When the RIDE mode is selected, you can
still press the START/Interval button to enter a new
interval.
4. Exit the RIDE mode.
To exit the RIDE mode and view the current
INTERVAL mode, press the START/Interval button.
The console will also exit the RIDE mode automati-
cally after 10 seconds.
HOW TO USE THE AUTO PAUSE MODE
The console has an Auto Pause mode that allows you
to stop your ride temporarily and then resume your ride
without affecting the average value data shown and
saved by the console.
The console will enter the Auto Pause mode when you
stop pedaling and the console does not detect a pedal-
ing cadence.
Note: The console will not enter the Auto Pause mode
when the WARM UP mode is selected.
When the console
enters the Auto Pause
mode, a pause symbol
will appear in the mes-
sage banner. The time
display will pause.
The console will exit the Auto Pause mode and return
to the current interval when you resume pedaling and
the console detects a pedaling cadence.
The console will exit the Auto Pause mode and enter
the Sleep Mode after 3 minutes if the console does not
detect a pedaling cadence.
Note: If desired, you can disable the Auto Pause mode.
See HOW TO USE THE AUTO PAUSE OFF MODE at
the right.
