10
HOW TO USE THE CONSOLE
To activate the console, see this page. To turn off
the console, see this page. To use the backlight, see
this page. To set up the console, see page 11. To
use the WARM UP mode, see page 12. To use the
INTERVAL mode, see page 13. To use the RIDE
mode, see page 14. To use the Auto Pause mode,
see page 14. To use the Auto Pause Off mode,
see page 15. To use the TOTAL RIDE mode, see
page 15.
HOW TO ACTIVATE THE CONSOLE
IMPORTANT: If the console has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you install batteries and activate
the console. If you do not do this, you may damage
the console display or other electrical components.
Press any button on the console to activate the con-
sole. The display will then light and the console will be
ready for use.
HOW TO TURN OFF THE CONSOLE
To conserve battery power, the console will automati-
cally enter the Sleep Mode in the following conditions:
When the User Setup mode is selected—The con-
sole will enter the Sleep Mode after 45 seconds if the
pedals do not move or if no buttons are pressed.
When the WARM UP mode, the Auto Pause mode,
or the TOTAL RIDE mode is selected—The console
will enter the Sleep Mode after 3 minutes if the pedals
do not move.
When the console is in the Sleep Mode, no data will be
shown in the display.
HOW TO USE THE BACKLIGHT
Press the Backlight button repeatedly to turn the back-
light on. To change the backlight duration, see step 4
on page 19.
