background image

3

14

1.

Read all instructions in this manual before
using the strength machine. Use the strength
machine only as described in this manual. 

2.

It is the purchaser’s responsibility to ensure
that there is enough space around the
strength machine for the intended exercise.
Do not crowd the strength machine.

3.

Using the two 9/16” anchor holes to provide
maximum stability, the strength machine
must be anchored to the floor where required
or whenever possible.

4.

Use the strength machine only on a level sur-
face. Cover the floor beneath the strength
machine to protect the floor.

5.

It is the responsibility of the owner to ensure
that all users of the strength machine are
adequately informed of all precautions, have
read and understood all warning and caution
labels, and are informed of how to use the
strength machine properly. 

6.

Keep children under 12 and pets away from
the strength machine at all times. 

7.

Keep hands and feet away from moving
parts. Do not lean on or rest your hands on
the strength machine when it is in use.

8.

Always wear athletic shoes for foot protec-
tion while exercising.

9.

All users of the strength machine should be
instructed to report any injury or strength
machine irregularity to facility staff immedi-
ately.

10. Make sure the weight selector pin is com-

pletely inserted into one of the weight plates.

11. Make sure the handles are attached securely

before each use of the strength machine.

12. Check all cables, cable connections, and pul-

leys before each use of the strength machine.
Make sure all parts are properly tightened.
Replace any worn parts immediately.

13. Make sure the cable remains on the pulleys

at all times. If the cable binds while you are
exercising, stop immediately and make sure
the cable is on the pulleys and nothing is
interfering with the cable or pulleys.

14. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-
ing down.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product. 

WARNING:

To reduce the risk of serious injury, read the following important precautions

before using the strength machine.

IMPORTANT PRECAUTIONS

NOTES

Summary of Contents for Abdominal









Reviews: