P4
STEP 1: MODULE MOUNTING / WIRING:
Mount the stabilization modules to the camera mount in the specified locations (see Images 2-6). It is very important
to pay attention to the mounting orientation. The modules must be mounted as shown for proper operation. The roll,
tilt, and pan modules are identical. The only difference is a software setting. Note that external potentiometers are no
longer needed when using the Freefly Radian Stabilization System. To prepare the CineStar 2-axis and 3-axis gimbals
for the stabilization modules, you must unplug the external potentiometers and install the resistors (included) into the
servo lead that previously connected to the external potentiometer. Next, you will need to attach the Radian mounting
plates for roll and tilt. Please ensure that the modules are rigidly attached to the camera mount. The sensors used in
the system are very sensitive and it is important that they are firmly attached, so that they can accurately sense all the
movements of the camera mount.
Summary of Contents for RADIAN
Page 1: ...VER1 0...
