Freedom LiTE Installation Manual Revision 14
P a g e
4 | 30
5.
Location of DB15 Analogue and Relay Control Port on older models (note that for
production from 9 September 2019 this port is no longer provided owing to migration
of all interfacing to CAN Bus)
6.
CAN Bus Sockets x 2 (RJ45) (one socket must contain a termination resistor if end of
line)
7.
USB Programming Port (not visible in photo). Note that in models manufactured prior
to May 2020 this port is a DB9 plug.
8.
Reset Button (not visible in photo)
9.
State of Charge Display (note some models have a multicolour ON button to depict
the state of charge according to a colour wheel sticker surrounding the ON button
–
see Figure 2.2.
10.
Error Light (for the multicolour ON button models an error is depicted by a brief red
flash)
11.
On Button
12.
Off Button
13.
Lifting Eye Bolt Hard Point (not visible in photo)(eye bolt not provided)
14.
Manoeuvring Handles
15.
Feet
Figure 2.2 Colour Wheel on Some Models Depicting the SoC of the LiTE
The weight of each model is given in Table 2.1. The Freedom LiTE Home 5/4, 10/8 models
can be manually handled by two people. The 15/12 and 20/16 can be manually handled by
four people. The larger units may require lifting equipment of varying degrees for handling
and installation as explained later in this document.
