23
Appendix B - Changing and Saving Settings
Y
ou can change the unit’s factory settings using the Configuration menu as
described in this section.
Note:
When configuring color modes, it is best to have both a page of text and
a color photo to place under the camera to select settings best suited
for you.
1. Press and
hold
the black
ADVANCED
button and the orange
FIND
button
for approximately 10 seconds to open the Configuration menu. Release
the buttons when the firmware version number displays.
The color mode setting displays on the screen: the color mode icon ( or
), a check mark or X to indicate if the color mode is enabled or disabled,
and the position number.
Color modes for positions 1 through 3 cannot be changed or deleted. For a
list of available colors, refer to
Color Modes
on page 22.
2. Turn the blue
COLOR MODE
dial
to scroll through positions 4 through
12.
To select and enable (
) a position:
Press the red
FREEZE FRAME
button
.
The color combination currently displayed on the screen is assigned to
that position number.
If you press the button again, the position is cleared (
) and disabled.
To select a position (4 through 12) and a color mode:
Turn the yellow
BRIGHTNESS
dial
to view the 33 color modes.
When you find a color mode that you want to use, press the red
FREEZE FRAME
button
to select (
) the color combination and
enable the current position.
Repeat this step as necessary to configure other positions.
