6
•
Enabling Quick Scan Mode
•
Quitting
ScanTalker
Scanning for the First Time
Use the following procedures to test and verify
that your scanner operates properly with
ScanTalker.
1. Turn on your PAC Mate.
2. Connect the supplied USB adapter to the
scanner's USB cable connector, and then
plug the adapter's mini-A USB connector in
to the PAC Mate's USB port.
The scanner emits a beep tone indicating
that it is connected to the PAC Mate and
turned on.
Caution:
Do not point or look directly into the
scanner’s laser beam.
3. Insert the ScanTalker CompactFlash card
into an available CompactFlash slot on the
PAC Mate.