
17
8.
After a few seconds, you will receive a message informing you
that the Bluetooth device was successfully connected and the
outgoing and incoming COM port assignments are displayed.
Make a note of the outgoing port number as this is the port
JAWS will use to communicate with the Focus.
9.
Choose Finish to close the wizard, and then OK to close the
Bluetooth Devices dialog box and save your settings.
Note:
Your settings will not be saved if you do not exit both the wizard
and Bluetooth Devices dialog box as described in step 9.
You must now configure JAWS to use the COM port that was added
when you paired the Focus. To configure JAWS, do the following:
1. Press
J
to open the JAWS window.
2. Press
ALT+O
to open the Options menu and select Braille to
open the Braille Basic Settings dialog box.
3.
In the Default Braille Display combo box, make sure Focus is
selected then choose Modify Settings.
4.
If you are using JAWS 13 or later, in the Select the output port
edit combo box, choose Bluetooth. Otherwise, select the port
that corresponds to the outgoing COM port number that was
displayed after you finished pairing the Focus.
5.
Select OK and you are instructed to restart JAWS in order for
these changes to take affect. Select OK to close this message
and once more to close the Braille Basic Settings dialog box.
6.
Quit and restart JAWS and your Focus 40 Blue is now
communicating with JAWS over Bluetooth. If you are using
JAWS 13 or later, JAWS automatically detects the correct
Bluetooth serial port.
To check the battery status, press the power button to display the
percentage of battery power remaining. The letters “BT” are also
displayed in cells 38 and 39 to indicate the Bluetooth connection is active.
Press a cursor router or Navrow button to return to normal operation.