
14
Adding JAWS Support to the Focus Display
If you are using the Focus 40 Blue with JAWS 10 or earlier, you will need
to first install the driver included on the Companion CD that came with
your display before connecting it to your computer. JAWS 11 and later
automatically installs the files necessary to use the Focus 40 Blue.
Note:
If you choose to use the Focus display with a third-party screen
reading application, you must still install the driver from the
Companion CD. However, once installed, refer to the
documentation that came with the software for information on
configuring and using the Focus with the particular application as
certain commands may be different.
Installing the Focus Display in JAWS 11 or Later
To configure the Focus 40 Blue braille display to operate with JAWS 11
or later, do the following:
1.
Perform the JAWS installation and restart your computer when
prompted.
2.
After the computer restarts and JAWS loads, establish a USB
connection between the Focus and computer.
3.
Windows will detect the display and install the appropriate
drivers.
Note:
Windows XP will display a Found New Hardware Wizard,
prompting you to locate the driver. Choose the option to
automatically install the software then select Finish to complete
the installation.
4.
Once the drivers have been installed, you must close and restart
JAWS in order to begin using your Focus 40 Blue.