background image

 

ONYX Deskset 17 Us

er’s Guide

 

3

 

Safety and Maintenance 

To keep the unit in good condition and to ensure safe usage, observe the following guidelines: 

 

Read the instructions in this user’s guide before attempting to use the unit. 

 

Do not attempt to repair the unit or open its case. This product contains no user 
serviceable parts.  

 

Do not attempt to modify the remote control. Changes or modifications not expressly 
approved by the party responsible for compliance could void the user’s authority to 
operate the equipment. 

 

Keep the unit away from wet areas, rain, and other sources of liquids or high humidity. Do 
not submerge the unit. 

 

Always operate the unit in a place where the temperature is between 10° and 40° C (50° 
and 104° F).  

 

Always store the unit in a place where the temperature is between -20° and 65° C  
(-4° and 149° F). Do not store in a parked car, because the temperature often exceeds 
this range. 

 

Always use the unit on a stable, level, hard surface such as a desk or table.  

 

Never force connectors 

into the unit’s ports. All appropriate connectors should fit easily 

into the ports. It the connector does not fit, turn it around, and try again. 

Summary of Contents for Deskset 17







































Reviews: