background image

18

Damage Caused by Use and/or the Environment

 The Warranty does not cover surface rust, deterioration and damage to paint, trim, upholstery, and other appearance items of the conversion components 
that result from use and/or exposure to the elements. You, as the owner, are responsible for these items. Some examples are:

-Dings and dents
-Cuts, burns, punctures or tears
-Road salt
-Tree sap, bird and bee droppings
-Windstorm, lightning or hail
-Earthquake
-Freezing, water or flood
-Stone chips, scratches 

Maintenance/Wear:
 The Warranty does not cover: (1) parts and labor needed to maintain the vehicle; and (2) the replacement of components due to normal wear and tear. 
You, as Owner, are responsible for these items. 

LIMITATIONS AND DISCLAIMERS

The Warranty is subject to the following limitations and disclaimers:

 The warranties expressed in this Warranty are the only express warranties applicable to conversion components. FMI does not assume or authorize 
anyone to assume for it any other obligation or liability in connection with its conversion components or the Warranty. No person, including FMI 
employees, may modify or waive any part of the Warranty.

 FMI reserves the right to make changes in or additions to conversion components designed, manufactured or sold by it at any time and without incurring 
any obligation to make the same or similar changes or additions to conversion components previously designed, manufactured or sold by it.

 FMI also reserves the right to provide post-warranty repairs, conduct recalls, or extend warranty coverage periods for certain conversion components, at 
the sole discretion of FMI. The fact that FMI has provided such measures to a particular conversion component group in no way obligates FMI to provide 
similar accommodations to other owners of similar conversion components.

 As a condition of the Warranty, you are responsible for properly using, maintaining, and caring for your conversion components. FMI recommends that 
you maintain records and receipts of all maintenance records.

WARRANTY

Summary of Contents for REAR-ENTRY CONVERSION


























Reviews: