12
Freecom ToughDrive
GB
3
Chapter 3: Driver installation (PC only)
Under Windows ME / 2000 / XP a separate Freecom driver is not required. The
drivers will be installed automatically by the operating system after plugging in
the Freecom ToughDrive into the USB port of the computer.
Driver installation USB under Windows 98 SE
Note: Your Freecom ToughDrive is fully backwards compatible
with USB 1.1. The installation for USB 1.1 is the same as described
below for USB 2.0.
1. Insert the Freecom Manual and driver CD into the CD-ROM drive.
2. Connect your Freecom ToughDrive to the USB connector of your notebook
or computer.
3. The "Add New Hardware Wizard" opens and a "USB 2.0 Device" (USB 2.0) or
a "USB TO IDE" (USB 1.1) is found.
Click on "Next".
