![background image](http://html1.mh-extra.com/html/freecom/skype-phone/skype-phone_user-manual_2329525017.webp)
17
GB
Mac Confi guration
. Hardware Installation and setting
After installing Skype and Freecom Internet Phone application, please plug in Freecom Internet
Phone into the USB port of your Mac. You have the option to customize personal setting.
1. Go to the “Applications” folder to start Freecom Internet Phone software. The fi rst
time you start the program, a Skype warning display will appear:
a)
Allow this program to use Skype
: Allow Freecom Internet Phone to work with Skype
permanently. Select this option is recommended.
b)
Allow this program to use Skype, but ask again in the future
: Every time when
you start Freecom Internet Phone, the above warning window will appear.
c)
Do not allow this program to use Skype
: Select this option to disconnect Freecom
Internet Phone to Skype.
2. Please connect Freecom Internet Phone to the USB jack of your Mac.
3. After a few seconds, your new hardware will be recognized. Installation for Freecom
Internet Phone is then complete.
Please refer to chapters and 4 for further confi guration of the Freecom
Internet Phone. Screenshots for Mac may be slightly diff erent from the
PC screenshots shown below.