![Freecom FC TapeWare AIT-250i FC Specification Download Page 123](http://html.mh-extra.com/html/freecom/fc-tapeware-ait-250i-fc/fc-tapeware-ait-250i-fc_specification_2329662123.webp)
REQUEST SENSE
6.Command Specification
SONY AIT-E Turbo drive SDX-250V series Ver.1.0
6-71
3D 00
INVALID BITS IN IDENTIFY MESSAGE-Identify message was not 80h or C0h.
55 04
INSUFFICIENT REGISTRATION RESOURCES(attempt to register more than 1 key)
83 02
No MIC Detected
83 04
MIC out of Memory
83 05
No Data Body Detected in the MIC
83 0C
MIC format type is undefined
83 0D
MIC capacity field indicates illegal value.
83 80
Partition Count exceeded
83 89
User Volume Note Size Mismatch
83 8A
User Partition Note Size Mismatch
83 97
Current Partition is not the last partition
83 98
Can not append the new partition, because remaining capacity too short.
83 99
Can not delete partition
83 9B
Can not format tape because real tape capacity is exceeded
83 9C
Can not append new partitions because the MIC is out of memory
06h
UNIT ATTENTION
. Indicates that the removable medium may have been changed or
the target has been reset.
28 00
NOT READY TO READY TRANSITION, MEDIUM MAY HAVE CHANGED
29 00
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
29 80
Drive Failed Power-on test or Diagnostic-(SONY Unique)
2A 01
MODE PARAMETERS CHANGED-Issued to all other initiators after one initiator
changes any Mode Parameter.
2A 03
RESERVATION PREEMPTED(after removing reservation by the CLEAR action)
2A 05
REGISTRATION PREEMPTED (after removing reservation by the PREEMPT or
PREEMPT ABORT action)
83 87
Broken MIC is loaded in AIT mode
07h
DATA PROTECT
. Indicates that a WRITE type of operation was attempted on a write
protected tape, write operation is not performed.
27 00
WRITE PROTECTED–Cassette is Write Protected.
83 0B
BROKEN MIC–Cassette is Write Protected
08h
BLANK CHECK
. Indicates the drive encountered blank medium or end-of-data
indication while reading.
00 00
NO ADDITIONAL SENSE INFORMATION - Blank Tape was encountered at BOT
00 05
END-OF-DATA DETECTED - During READ or SPACE command.