15
GB
3
3.3 De-Installing the software
- under Windows 95/98, Windows ME and Windows NT 4.0
1. Click
"Start" - "Program" - "FREECOM Cable II Parallel"
and then double-click
the icon
"unInstall"
.
2. Confirm the next prompt by clicking
"Yes"
.
- under DOS/Windows 3.x
If you want to undo the installation, start the program
"UNINST.EXE"
in the
installation directory. This removes all files and entries from the system.
3.4 Assigning the drive letter to the FREECOM Drive
under Windows 95/98
After successful installation, Windows assigns the FREECOM drive a new drive
letter, automatically in most cases. This can shift the drive letter of an internal CD-
ROM drive (for example, from 'D' to 'E'). If this leads to problems, it is possible to
change the drive letter assignment as follows:
1. Click
"Start" - "Settings" - "Control Panel"
.
2. Double-click
"System"
.
3. Click the tab
"Device Manager"
and then click
"Disk Drives"
or
"CD-ROM"
if
your FREECOM drive is a CD-ROM, DVD-ROM, CDWriter or CD-ReWriteable
drive.
4. Double-click the FREECOM drive, and then the tab
"Properties" - "Settings"
.
(The currently assigned drive letter as well as the reserved drive letters will then
be displayed).
5. Under
"Reserved Drive Letter"
enter a drive letter, for example, "F" for the
FREECOM device as the
"Start drive letter"
and "F'' again as the
"End drive
letter"
.
6. Confirm your selection with
"OK"
. When you restart your computer, the
FREECOM drive will be assigned the letter "F" in
"My Computer"
.
De-Installing the software
