![background image](http://html1.mh-extra.com/html/freecom/cable-ii-parallel/cable-ii-parallel_manual_2329511010.webp)
10
FREECOM Cable II Parallel
GB
3
C
HAPTER
3:
Reference section
3.1 Advanced settings in the FREECOM configuration
under Windows 95/98, Windows ME and Windows NT 4.0
"FREECOM Configuration"
will automatically configure the FREECOM drive to
your PC. When installing the device for the first time, the setup program
automatically detects the type of parallel port in your PC and configures the
optimum data transfer mode for the parallel port. Normally, this is the optimum
setting which eliminates the need for making this setting manually. In the event
that you wish to have a different setting, you can call up the
"FREECOM
Configuration"
as follows: Click the Windows
"Start"
button and then click
"Program"
,
"FREECOM Cable II Parallel"
. Double-click the icon
"FREECOM
Configuration"
. You will see that the settings for the parallel port transfer mode
as well as the parallel port address are set to
"automatic"
. The values detected by
the configuration program are shown in the first three lines of the upper section.
Status messages:
'Driver'
-
Device driver version
'Drive'
-
Drive designation
'Connection'
-
Connection information (parallel port mode, EPP
write mode"(R/W)", port address and possibly
interrupt) or possibly errors.
To set the parallel port mode or address manually, simply click the desired settings.
Status lines
Settings