Free The Tone Arc-53m, Owner'S Manual

Page: 11 / 16

MIDI (PS2/7/L2 footswitch)
Select Switch Menu How to Set
1
MIDI Rx [RC]
This item is used to set the MIDI receive channel.
[RC] on  ENTER  [OM] flashes  Set  ENTER
Parameter: CH1 [C1] to CH16 [C16], OMNI [OM], OFF [OF]
(default: OMNI [OM])
2
CSW CC# [CC]
This item is used to set the MIDI control change
number to be sent.
Up to 4 control switches (CSW1–CSW4) can be
set. MIDI control change number and MIDI channel
can be set for each CSW (control switch).
[CC] on

ENTER

[S1] on

Set (param1)

ENTER

[OFF] flash  Set (param2)  ENTER  [CH01] flashes 
Set (param3)  ENTER
Parameter 1: CSW1 [S1] to CSW4 [S4]
Parameter 2: 000 to 120, OFF [OF] (default: OFF [OF])
Parameter 3: CH1 [C1] to CH16 [C16] (default: CH1 [C1])
3
CSW SWITCH TYPE [ST]
This item sets the operation type of the CSW
(control switch) specified by item 2 above.
Available operation types are: Latch, Momentary,
and On Send in which only the maximum value is
sent when the LED is turned on.
[ST] on

ENTER

[S1] flashes

Set (param1)

ENTER

[LT] flashes

Set (param2)

ENTER
Parameter 1: CSW1 [S1] to CSW4 [S4]
Parameter 2: LATCH [LT] / MOMENTARY [MO] / ON SEND
[OS] (default: LATCH [LT])
4
Control Change Number [CN]
This item is used to set the control change number
assigned to each function.
* This menu is used to edit CC# assigned to each function.
[CN] on
 ENTER  [L1] on  Set (param1)  [OF] flashes
 Set (param2)  ENTER
Parameter 1: LOOP1 [L1] to LOOP5 [L5]
MUTE [MT]
MODE [MD]
CTL1 [C1] to CTL3 [C3]
Parameter 2: 000 to 120, OFF [OF] (default: OFF [OF])
Items with initial settings
CTL1 [C1] 000 to 120, OFF (default: 113)
CTL2 [C2] 000 to 120, OFF (default: 114)
CTL3 [C3] 000 to120, OFF (default: 115)
5
MIDI OUT/THRU [OT]
This item is used to set the operation mode of the
MIDI OUT/THRU terminal.
[OT] on  ENTER  [OT] flashes  Set  ENTER
Parameter: OUT [OT], THRU [TH] (default: OFF [OF])