M
aurice Pincoffs Canada ©
2012
5
ASSSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine. Please
read this manual carefully. For the sake of familiarizing yourself with the parts identified in
the instruction, first study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts
list for help to identify the parts. It will take two people to assemble your unit.
Step 1
Attach the front stabilizer (3) with two transportation wheels (13) to the front of the main
frame (1). Secure using two carriage bolts (54), two curved washers (18) and two domed
nuts (17).
Attach the pedal support tube (5) to back of the main frame (1). Secure using two carriage
bolts (16), two flat washers (23) and two domed nuts (28).
Step 2
Connect the extension sensor wire (50) to the
sensor wire (29) .
Pull out the lock pin (22), allen bolt (21), flat washer (23) and nylon locknut (24) from the
main frame. Insert the slide rail (2) onto the U type connect tube on main frame (1).
Secure using lock pin (22), allen bolt (21), flat washer (23) and nylon locknut (24) from
the side, and then secure using adjust knob (19) and washer (20) from the top.
Remove the collars (32) & allen bolts (31) from the side of slide rail (2). Slide the seat
(51) onto the slide rail (2). Tighten the collars (32) to the slide rail using allen bolts (31).
Attach the end caps (33 & 38) onto the back of the slide rail (2).