M
aurice Pincoffs Canada ©
2012
6
S
tep 3
Attach rear stabilizer (4) with leveling end caps (15) to back of the slide rail (2). Secure
using four allen bolts (40) and four washers (23).
Attach the left pedal (6L) to the left bracket of the pedal support tube (5). Slide the
axle (27) through the left pedal (6L). Secure using two allen bolts (25) and two flat
washers (26).
Repeat the same procedure for right pedal (6R).
Step 4
Connect the sensor wire (42) on the back of the computer (41) to the
extension sensor
wire (50).
Attach computer (41) to computer bracket (7) and tighten with two philips screws (49)
which are pre-assembled on the back of computer.
Note: Ensure that the wires are not pinched behind the computer.
You have completed the assembly of your new dual action recumbent.
The monitor can only be powered by using the AA battery.
