p. 3
AVM Around Vehicle Monitoring System Installation Guide
inView 360 HD Installation Guide
© Safe Fleet | July 2020 | All rights reserved
Document Number: XE-SNB100-C00-INSTALLPM-R0A
Introduction
The inView 360 HD AVM is a high-definition multi-camera system that provides drivers with a top-down “bird’s eye” 360°
view of the area around their vehicles� Large vehicles, due to their size and shape, often have areas which drivers cannot
see unaided. By providing drivers with a full 360° view of the area around their vehicles, the inView 360 HD AVM helps to
eliminate these vehicle “blind spots”, contributing to the reduction of collisions with surround pedestrians and vehicles.
How Does the inView 360 HD AVM Work?
High-definition cameras are placed high up on the front, rear, left, and right sides of the vehicle. Videos from these four
cameras are sent to the on-board computer, which, with the help of proprietary software, stitches/combines these video
feeds to create the
360° view of the area around their vehicles.
Cameras
Camera FoV
Cameras and Camera Fields of View (uncombined)
Combined 360° Video
Camera FoV
Cameras
Cameras and Camera Fields of View (combined)
NOTE: Spacing the Calibration Pads
Vehicle makes, models and sizes vary. Therefore, this document does not specify exact locations for the kit’s
components� Instead, this document describes the best locations for installing components for optimal operation and
ideal placement of cameras for optimum fields of view.
NOTE: Installation Locations