FRC InView 360 HD AVM Installation Manual Download

Page: 17 / 19

p. 17

AVM Around Vehicle Monitoring System Installation Guide

inView 360 HD Installation Guide

Document Number: XE-SNB100-C00-INSTALLPM-R0A

2� Use the correct harness to connect each switch to the ECU�

Driver/Event Button Cable

Harness

Outrigger Button Cable Harness

Dashboard Push Button

Mount/Template

Dashboard Push Button

Mount/Template

Event Button Cable Harness

Black Push

Button Switch

Green Push

Button Switch

Red Push

Button Switch

3� Install the dashboard push button

mount/template into the dashboard�

4� Install the push buttons in the mounting plate on

the dashboard�

5� Connect the correct cable harness to the correct button� Install the

mounting plate into the dashboard�

6� Install the push buttons in the mounting plate on the dashboard�

7� Connect the correct cable harness to the correct button�

Summary of Contents for InView 360 HD AVM



















Search results

Summary of Contents for InView 360 HD AVM

Reviews:

Related manuals for InView 360 HD AVM

Brands by name

Popular brands

FRC InView 360 HD AVM, Installation Manual

Search results

Summary of Contents for InView 360 HD AVM

Reviews:

Related manuals for InView 360 HD AVM

Brands by name

Popular brands