IPF Rev0204
15
Totalized Flow
The total button is used to perform two functions, display total flow and reset the
totalized flow to 0 if the reset function is set to YES.
Display Total Flow
When the
TOTAL
button is pressed and released the digital display will show the
total accumulated flow and the
TOTALx100
LED will be on. (The flow will be x 100
the number shown in the display.)
Press and release the button again to show normal flow rate.
The total will continue to accumulate even if power has been off unless the reset
function is enabled.
Reset Total Flow to 0
The totalizer reset function (code 317) has two program settings YES or no. (Refer
to Programming section.) To enable the reset function the program totalizer reset is
set to YES.
Totalized flow will reset and start from 0 when power is off. Flow total can be
reset to 0 during operations by displaying the total flow and then pressing and holding
the
TOTAL
button until the display shows 0.
