DF4000 Rev0204
20
Figure 7. Typical Programming Displays
Error Code:
Shows if an invalid program code has been entered.
ID Number:
To change use program access code 312.
DISPLAY MODULE IDENTIFICATION MODE DISPLAYS
Serial Number:
This is set at the factory.
Manufactured Date:
This is set at the factory (mm.yy).
Software Revision:
This is set at the factory.
Module Function:
To change use program access code 313.
PROGRAM ACCESS MODE DISPLAYS
Mode Selected:
Ready for program code to be entered.
Entering Code:
Ready for first digit of code to be entered.
Code Entered:
Valid three digit code.
Automatic:
Programmed value or option is shown.
Exit Mode:
Ready for another program code to be entered
or return to normal operation.
Change Option:
New program value or option is selected.
Note:
Refer to Program Access Mode for detailed information.
Note:
Refer to Display Module Identification Mode for detailed information.
