TGA100 Rev0106
17
High Idle
The INControl programming includes a high idle function that is controlled by
the High Idle Switch.
To activate the high idle set interlocks as called for by SOP (normally this would
include the transmission in neutral and the parking brake on ). Set the High Idle switch
to ON.
Note: The pump must NOT be engaged when using the high idle
function and the OK TO PUMP LED will be off.
Change High Idle Setting
Note: The high idle is set at about 1000 RPM at the factory. (This value will
vary depending on the specific engine.)
1. With the engine running, set the high idle switch to ON.
Result: Engine RPM goes to high idle.
2. Press and hold
PRESET
button.
Result: RPM display will flash and show the high idle setting.
3. Press
INC/DEC
button to change the high idle RPM setting.
4. Release
PRESET
button to store the new high idle setting.
