TGA100 Rev0106
16
Change Preset Setting (Pressure or RPM)
The preset button allows the operator to go to a pre-programmed pump pressure
or engine RPM during operations. The setting will be shown on the PSI/RPM setting
display. This procedure is to change the setting in the program.
Note: The engine must be running and the pump engaged interlock circuit
must be closed (the OK TO PUMP LED must be on).
1. Press
IDLE
button.
Result: Display shows
IdLE
.
2. Press
PSI
or
RPM
mode button to select the setting to be changed.
Result: LED indicator goes on for mode selected.
Note: The
RPM
display must show
IdLE
before changing the preset.
3. Press and hold
PRESET
button. (Continue to hold through step 4.)
Result:
PUMP DISCHARGE
or
RPM
display flashes previous programmed
preset.
4. Press
INC
or
DEC
button to change preset setting.
5. Release
PRESET
button.
Result: The new preset is programmed.
RPM
display shows
IdLE
.