Fransgard V-3004, Manual

Page: 17 / 24

-15-
Delivery Check List
Winch Model: ___________ Serial No.: ____________
Dealer Check List on delivery of winch
1) PTO cut and installed on tractor with proper overlap of
Safety guard and shafts to prevent the Shaft f
rom “binding” or “
bottoming-
out” when the winch is raised with the three-point hitch
[ ]
2) The three-point hitch is to be adjusted properly so that the Protection
screen does not hit the tractor cabin when the winch is raised [ ]
3) Operating and Safety Instructions reviewed with Purchaser [ ]
4) Purchaser advised that the choker chains be removed from the cable when [ ]
the logs have been pulled in and how to attach the chains properly to the
tow bar before moving with the tractor, for safety and preventing severe
damage to the winch.
5) Purchaser advised how to activate pulling procedure with Green power cord [ ]
and ensuring the clutch lever comes to rest tightly against stop to apply
full pressure on the clutch discs.
6) Advise the purchaser not to put oil on the drive chain, but only a little bit [ ]
of grease, occasionally, since clutch lining is 1”below the drive chain.
7) The support table under the top pulley must be greased and free of dirt [ ]
and debris, so the top pulley will swivel easily and prevent additional wear
to cable and top pulley
Dealer Signature __________________, Purchaser Signature ________________________
Printed Name ______________________, Printed Name ___________________________
Dealership Name _______________________________,
Street Address __________________________, Street Address ___________________________
Town, State, Zip __________________________, Town, State, Zip ___________________________
Date: _____________
Note: (Dealer, please keep copy and return original to Distributor to activate the
Winch warranty within 30 days of the sale)