Fransgard GT-300AUS, Manual, Page: 17 / 20

~ 14 ~
Troubleshooting
Should you, contrary to expectations, experience problems with the functions of your GT-300AUS leveller, you can use this
troubleshooting form to see if the error is possibly described here, before contacting your dealer or Fransgård.
Fault Possible cause Action/Explanation Performed by
The blade will not
turn.
Defective cylinder. Check that the piston is not skewed. The user/owner.
Defective output from the tractor.
Try using another of the tractor's
outputs.
The user/owner.
Hydraulic hoses ruptured. Check for oil along the hydraulic hoses. The user/owner.
The blade cannot
be raised or
lowered.
Defective cylinder. Check that the piston is not skewed. The user/owner.
Defective output from the tractor.
Try using another of the tractor's
outputs.
The user/owner.
Hydraulic hoses ruptured. Check for oil along the hydraulic hoses. The user/owner.
The blade will not
tilt to some of the
sides.
Defective cylinder. Check that the piston is not skewed. The user/owner.
Defective output from the tractor.
Try using another of the tractor's
outputs.
The user/owner.
Hydraulic hoses ruptured. Check for oil along the hydraulic hoses. The user/owner.
The wheel
chassis cannot
hold its height.
Leaking quick coupler/output.
Check the quick couplings and the
tractor's outlets for oil.
Change the quick coupling or O-ring if
oil is detected.
The user/owner.
Mechanic/Technician.
Leaky gasket at the end of the
hydraulic cylinder.
Check the hydraulic piston for oil.
Change the gaskets in the hydraulic
The user/owner.
Mechanic/Technician.