No.
Description
1
Pre-installed condensate pump unit
2
Pressure lines plastic bag includes:
transparent hose for pressure line, approx. 15 cm long
transparent hose for pressure line, approx. 150 cm long
3 x cable ties, approx. 30 cm long
self-adhesive hook-and-loop fastener strip (not required for profi-air 180 flat)
3
Anti-lift valve
4
Transparent silicone hose for pressure compensation, approx. 200 cm long
5
Connection cable to connect condensate pump to profi-air 180 flat control board
6
Cable and installation accessories plastic bag includes:
2 x screws to secure the condensate pump unit to profi-air 180 flat
Y-cable to connect condensate pump to profi-air 180 flat control board
2-pin connector plug for power supply of the condensate pump
2-pin connector plug to connect condensate pump to digital input on the control board
profi-air 180 flat (high water level alarm signal)
7
Inlet hose, Ø 12 mm x 210 mm
(only required if the profi-air 180 flat ventilation unit has been installed vertically on the wall)
8
Connection nipple for inlet hose
(only required if the profi-air 180 flat ventilation unit has been installed vertically on the wall)
9
Alternative condensate housing (not required for profi-air 180 flat)
1
4
7
2
5
8
5.1 Parts overview of the entire condensate pump kit
5 Installation
3
6
9
Installation / operating instructions – profi-air 180 flat condensate pump
7
